Epoxy Resin for Art Casting Resin for Artwork
|Epoxy Resin for Art Casting Resin for Artwork|
Epoxy Resin & Hardener
TC110: 2000-3000 Mpa.s ( 25ºC ) FL210: 1000-1500 mpa.s ( 25ºC )
TC110/HL310: FL210:5-7 Hours ( 25ºC ) 12-48 Hours( 25ºC )
Top Coating, Floor, River Table, Furniture, Table Top, Bar Top, Counter Top, Tumbler, Coasters and Trays, Photo Frame, Geode
TC110: 1:1 Mixing By VolumeFL210: 2:1 Mixing By Weight
Crystal Clear, Strong Formula, Food Safe, Not Change to Yellow, Non-Toxic, No BPA, Odorless, No VOC, No Bubble, UV Resistance,
For OEM order, we have 16oz, 32oz, 64oz, 1gallon kit, 2 gallon kit, 5kg drum.
3-5 Working days
ASTM D4236, EN71, SVHC 209-REACN
Our resin is self leveling, self degassing, low odor, Non-toxic (food safe) and no fumes,contains both a UV stabilizer and advanced additive resistant to yellowing, long lasting. Perfect for mica powder, deep resin molds,alcohol ink, resin pigment or river tables.
2:1 Mixture Resin & Higher Hardness: easy to by volume ratio,resin A to hardener B is 2 :1.After curing, the hardness of this resin is higher, more heat resistant to prevent warping, more wear-resistant and not easy to break. Deep Pour Epoxy Resin Up To 2 Inch: epoxy resin is able to fill gaps more than 2 inches thick at a time.Specially for epoxy resin wood filler applications,such as river bed, table side. Carefully and thoroughly avoiding forming bubbles, 45 minute work time, 48-72 hours cure time (according to your project)
1.Weigh A and B glue according to the given weight ratio into the prepared cleaned container, fully mixed the mixture again the container wall by clockwise, place it along for 3 to 5 minutes, and then it can be used.
2.Take the glue according to the usable time and dosage of mixture to avoid wasting. When the temperature is below 15 ℃, please heat A glue to 30 ℃ first and then mix it to the B glue (A glue will be thicken in low temperature ); The glue must be sealed lid after use to avoid rejection caused by moisture absorption.
3.When the relative humidity is higher than 85%, the surface of the cured mixture will absorb moisture in the air, and form a layer of white mist in the surface, so when the relative humidity is higher than 85%, is not suitable for room temperature curing,suggest to use the heat curing.